← Applications
Reference · End-of-line
End-of-line testing for particle counters
An end-of-line setup in series production at AVL DiTest: one station tests twelve particle counters in parallel — with software upgrade, flow calibration and pneumatic leak testing in one sequence.
Services
What the station does
Testing, calibrating and loading software — twelve instruments at a time, directly in production.
- Parallel testing — twelve particle counters at the same time at one station.
- Software upgrade — loading and updating the instrument software.
- Flow calibration — calibration of the flow rate for each instrument.
- Pneumatic leak test — leak test of the instruments.
- Further test and calibration steps — functional testing and parameter setting
Technical data
Data sheet
| Characteristic | Value |
|---|---|
| Customer | AVL DiTest |
| Application | End-of-line, in series production |
| Test item | Particle counter |
| Parallel testing | 12 instruments at a time |
| Software | Upgrade / flashing of the instrument software |
| Calibration | Flow (flow rate) |
| Leak test | pneumatic (pressure decay) |
| Production overview | Dashboard: assembly, EOL, calibration, dispatch |
| Cycle time | suitable for series production (12 in parallel) |
| Data connection | MES connection, traceability for each instrument |
Assumed values. The figures in this table are plausible assumptions for this project and are to be confirmed by engineering before publication.
From the project
The station in operation
Image to follow
Series testing in mind?
Tell us what is to be tested, calibrated or flashed at the end of the line — for several instruments in parallel as well.
